|
Too complex, shaun. A unistrut (for as long as you like the fence. Mine was 55"), 3" angle iron 10" long, and an 3" 1/4" thick alum. sq. tubing, 36" long, a 1/2" threaded rod and a cross handle, will out performance any of the wooden fence and a lot simpler to produce. Dare I put that up against a Unifence. No deformation even if yo crank on it due to it being steel unlike wood. Stick a couple of small pieces 1/16" thick UHMW under the fence so it glides over effortlessly. I did so much work out of that saw in those early years I ended up giving it to my neighbor. He was a DIY and drooled over my table saw. This is what happens when you are poor, figure out how to do anything on a budget.
Last edited by look 171; 10-18-2025 at 03:53 PM..
|