|
PCA Member since 1988
Join Date: Feb 2018
Location: SW Washington State
Posts: 4,357
|
Keep turning it, and pull outwards as you do. It will eventually come out. Then Timesert/Helicoil the stripped hole and reinstall. And make damn sure your torque wrench is accurate. 18 Ft-lb is the upper spec. For M8 nuts/studs/bolts, the usual spec range is 15-18.
__________________
1973.5 911T with RoW 1980 SC CIS stroked to 3.2, 10:1 Mahle Sport p/c's, TBC exhaust ports, M1 cams, SSI's. RSR bushings & adj spring plates, Koni Sports, 21/26mm T-bars, stock swaybars, 16x7 Fuchs w Michelin Pilot Sport A/S 3+, 205/55-16 at all 4 corners.
Cars are for driving. If you want art, get something you can hang on the wall!
|