Quote:
Originally Posted by MrBonus
Those look fantastic. Now you've got me thinking. I want to replace the mounting screws for my seats with black heads for a more seamless look.
|
Gotta sweat the details! I just did new black oxide screws & finish washers for my rear shelf + rear quarter panels/trim.
Per the photos: I got these from Monster Bolts. Went M6 x 30mm to allow for the spacers & reinforcement washers for the Scheels. If you still have the factory seats then 16mm or 20mm would be sufficient.
I usually source most of my fasteners from BelMetric but they didn’t have 12.9 grade socket heads — only 8.8 and A2, which I’m not willing to risk for seat mounts!
Bonus daylight photo:
__________________
1978 911 SC (3.2SS, EFI, 993SS cams + the trimmings)
Dynamic Comp Ratio calc: https://dcr.questionable.services/ • Gearset & Ratio calc: https://ratio.questionable.services/
Last edited by silverlock; 11-13-2025 at 10:20 AM..
|