Hi Members
Im after the main measurements for the bodywork on a 1974 Porsche 911 Targa. After sanding off the red top coat, I found lots of filler (up to 10mm in places) on the lock keep side of the door shut, to make the gaps correct. The car has had two new galvanised rear wings at some stage so I was after the sizes for the screen to rear roll bar and any cross reference measurements to the door openings and shuts etc. Ive searched these forums and the drawings available I've found are of poor print quality (as blurred)or don't show clearly exactly where the measurements start and finish. The reason I ask is my hardtop fits very badly with 10mm gap. If you have a targa with a good fitting roof maybe you could take me some photos and sizes.
Any help would be greatly received.
