[A930Rocket]

I stood the board on its side, then used my circular saw to cut as much as I could on both sides. Then I used the circular saw to cut the already cut piece off. You can see those pieces next to my speed squares. That left me with about a 1.5 inch wedge shaped section that I planed down. Probably took me about 20 minutes to do it all.

My concern is, the rear ramps will kick out. If that happens, I think I will use a rope to connect the front ramp to the back ramp. My thought is, the weight of the car/tires on the front ramps will hold the rear ramps in place.