|
Registered
Join Date: Dec 2007
Location: Just a little north of 13669/Nation's capital
Posts: 1,330
|
And changing the assembled height will probably impact the cam box. Having one cylinder shorter than the other 2 means the cam box will be bowed. I would have all 3 cyl/head combos on that side modified to ensure the deck heights are the same. To check, with the heads and cam boxes torqued, make sure your cam turns freely (no rockers in place). If so, then you are good to go.
__________________
1986 Targa Guards Red
2021 MT09 SP
|