[85RedCarrera]

For a 3.2, I think you stuck with .25mm, .50mm, and 1.0mm shims...there is nothing in-between.

For .75mm you have to stack a .25 and a .50

If there are .75mm shims out there, I could not find them. LNE sells a lot of custom shims for the older engines

My Mahle Motorsports (Moritz single-plug) piston/cyl kits required .75mm shims with the combustion chambers that I got back from my machinist (~89.5cc) to keep the deck heights above 1.1mm