[A930Rocket]

I’ve got the 1/4, 3/8, and 1/2 snap on torque wrenchs. The 1/2 is 35 years old and never calibrated but probably accurate enough for what I do.

The 1/2 can be cumbersome in tight quarters.

I also have an Icon digital 3/8 torque wrench I like because it can measure degrees.

I bought a Tekton 3/4 torque wrench for the over 200 lb ft fasteners. The E46 crankshaft pulley bolt was a ridiculous 300 lb ft or so.