Quote:
Originally Posted by John Rogers
If it were me, I would junk the stock hose since the hole seems to be a flow/erosion failure and find the correct diameter kevlar reinforced off road racing hose. I say that due to the appearance of the bends in the metal portion were not bent to insure equal strength throughout. I had to do that with my late daughter's Ford sedan 12 or so years ago. Lucky we live in Southern CA where there are lots of off road racing speed shops.
When I was stationed on board CGN25 about 1978 one night while making rounds we heard water running? Humm not normal on the main deck of a ship so when we found the source of the noise, it was a hole, little bigger than yours on the inside area of a firemain (salt water) 6 inch line! Shown a flashlight there and you could see the water rushing by and nothing was splashing out at all! Got it replaced the next day.
John Rogers the oldracer
|
I'm sure I would have to have something custom made to mimic the shape of the hose and pipe. Then there is the bracket, it bolts to the intake.
Sent from my SM-S916U using Tapatalk