|
I had a machine shop do this exact mod years ago. I don't know how they did it, unfortunately. He did the work relatively cheaply, nowhere near the price you are being quoted.
In my case, I initially had the 4 bolt, 2 pin flanges mated to 930 CVs on a racecar with some hp. The CVs would puke much of their grease every track weekend. I finally realized most of the grease was leaking near the pins, I assume due to minor flexing of the flanges. I was initially surprised at this, but replacing pins with 10 mm timeserts and bolts solved the grease leakage issue.
Last edited by stownsen914; 10-30-2026 at 04:43 PM..
|