|
Again. Been there. I had to manually snap the horseshoe spring back to get the position correct prior to adjusting the clutch cable. Once you do this, it should be OK. Just confirm that the horseshoe spring is against the heat exchanger. If it isn't then you need to snap it back. This will allow you to get the 25mm of travel required.
__________________
Gone but not forgotten -
1980 Porsche 911SC w/ -22mm/28mm Torsion Bars | Custom Valved Bilsteins | 22mm/21mm Carrera Sway Bars | Elephant Poly/Bronze Bushings | Carrera Brakes | AJ-USA Brake Cooling | Carrera Oil Cooler w/ Fan | Elephant Strut Brace | Oh, and no ABS or PSM or A/C
|