|
Registered
Join Date: May 2003
Location: Manhattan Beach, CA
Posts: 2,350
|
The gap on the sensors is not critcal, as long as they are NOT forced too close
to the flywheel. As long as the bracket has not been altered/damaged, the gap
should be O.K. If the boots are cracked or damaged, you can seal and hold the
boots together (and seal out moisture) by filling the boots with RTV silicone.
The key for the sensors is the voltage generated at cranking:
1. reference - > 80-100 millivolts A.C.
2. speed - > 1.00 volts A.C.
__________________
Have Fun
Loren
Systems Consulting
Automotive Electronics
'88 911 3.2
'04 GSXR1000
'01 Ducati 996
'03 BMW BCR - Gone
Last edited by Lorenfb; 06-02-2004 at 07:24 AM..
|