Quote:
Originally posted by rob justice
When re-fitting the sensors into the alloy bracket - is it worthwhile smearing anti-seize onto the outside of the sensor? I had one seize and fall to bits when I tried to remove it. Or would the sensor not work correctly if coated?
|
I antisieze mine but I haven't had occasion to remove them afterwards so I don't know if it makes a difference. Antisieze does not effect operation.
On the subject of grease/antisieze and it's effect on electrical contacts; I have not found it to hurt anything. On the contrary, it keeps oxygen away from the contacts and slows down corrosion.
-Chris