|
There is a good thread here recently about honing cylinders. Yours might be okay and only need rings. Have your machine shop check them. New P/C are pretty spendy, but if you need them might as well get the 98mm ones and have a nice 3.4. 964 cams are a great upgrade as well.
You can do this yourself. Many people here have rebuilt their engines. Just takes some research, planning and a little patience. I just did my 3.2 last month. 964 cams and SSI's with a SteveW chip and it pulls great.
Do a little searching on this forum and you will find a lot of info. Anymore questions?--don't be afraid to ask!
Good Luck, Jeff
__________________
Turn3 Autosport- Full Service and Race Prep
www.turn3autosport.com
997 S 4.0, Cayman S 3.8, Cayenne Turbo, Macan Turbo, 69 911, Mini R53 JCW , RADICAL SR3
|