Quote:
Originally posted by fstockcarrera
I 'm assumming a deck height of .0039 or 1.00mm.?? Have not recieved the new P's&C's yet, minus -.20 would give you a deck clearance of .0031 which seems low. The head machinist does not to lower the clearance below .0036 base on a 1mm deck height. I'm using standard rods and new Mahle P's&C's. I really need to measure the deck height. Do you have an idea what it should be??
Thanks Bob
|
I don't know what it should be. I don't know what the minimum deck height should be. I've been told that you don't want it greater (yes, greater) than 1mm/0.04" because it increases the chance of detonation in the resulting pocket along the outer edge of the piston.
-Chris