[qikcpa]

I been noticing that the left rear of my 76 is lower than the right rear. As well i have noticed that the left rear has the maximum negative camber while the right rear appears to have 0 camber. If I match up the cambers any chance the car will level out? Posts ive read indicate that height is set before camber. I'm guessing the answer to my question is that matching camber will have little or no change on ride height differences, and I should adjust height and then camber. Is this correct? I hate to go to the trouble of playing with the trailing arms and adjusting ride height to find that when the allignment is done the ride height is off again.