Quote:
Originally posted by Bill Verburg
I posted this in the other thread as well
6 spd t/p
Long story short, lots of cutting of chassis components, tube frame, some fabrication and you're good to go.
|
I've always been curious about this as well.
Bill-
The car in that link states it originally came with a 915, so it had to be a pre-`87 chassis. So, even if you wanted to put a 5-speed G50 in a 915-equipped car, you would need to cut the T-tube, and do some fabrication work. However, I am not sure the same work is required to put a 6-speed G50 (993) gearbox in a 5-speed G50 (`87+) chassis??
Inquiring minds.....
