[BigD9146gt]

Cory, they are 17mm hex (allen) sockets. You'll probably need to by the tool (a 1/4" socket 17mm hex) to get the job done (i tried to make a tool with a 17mm bolt, nuts and a wrench, but sometimes those suckers are in there tight). With the trans on level gound (either on the work bench or in the car), make sure the bottom plug is secured in the drain hole, then start filling the trans with new oil. I do this with a oil hand pump which can be purchased at any autoparts store. Stop filling when the oil starts flowing out the hole. Its that simple.

Cheers, Don.