cam replacement upon carb conversion
Hi guys,
I have been reading through my log book of records that came with my old 912E from the prior owners. I have about two inches of paperwork.
Anyway, when I bought the car, as a Porsche know-nothing (which is about where I still am!), the car had been converted from the injection to a 32/36 single Weber setup-the one with the octopus like intakes.
Well, as my knowledge has grown a wee little bit, I came to look to see if the cam had been changed to a carb-specific one at the time of the swap. From the records, this does not appear to have been done.
So, here's where I am today. I replaced the 32/36 last year with a set of freshly rebuilt 40mm Webers. Presently, I'm considering ordering a set of the velocity stacks from CB performance (any opinions on that matter?).
My car also has a Permatune installed. 009 Distributor, blue coil, etc. Nothing fancy.
Should I opt to have a more appropriate cam installed? Any suggestions?
As always, guys, I appreciate the help a lot.
Best regards,
David Cardone
|