|
yes read the forum...still lost
Summary:
Dash brake light on (hand brake pulled), with car on or ignition in the on position, latch open with windows going down normally (latch switch working, old and new one act exactly the same). Push dash button and nothing. No motor noise, no movement...
Pushing the latch button makes no difference, whether I use the new switch or old switch.
Unknowns:
relay (reinserted, but not tested)
dash switch (light comes on with lights, moved electrical to above switch with no difference) is that a good test?
brake microswitch - if light comes on dash is that enough?
speed sensor signal - not sure how to test
motor - testing voltage from switch to motor.
|