|
Registered
Join Date: Jul 2001
Location: Edmonton, Alberta, Canada
Posts: 4,530
|
You can also use a 1/2 inch deep socket.........and just lightly tap them in........you will easily hear them bottoming out.
....and if by chance these are the stock valve guides (smooth) you should use an adhesive to hold them in.......I had to use loctite 514. If you have guides with the cutouts then its not a problem the guide will dig into the seal.
__________________
Alex - PCA Polar Region - Boxster Muncher
86' 944 Turbo - Megasquirt - 326 rwhp/340lbft @ 18 psi SOLD
www.edmontonhomelife.com
www.edmontonrealestate.ws
|