Hi guys,
My cold start problems which I thought were solved for good are back again (on and off).
Of course, when it starts I'm getting spark, but when it's not starting I'm not getting any spark.
Last time we found out that it was the wires going to the speed sensors that were the problem, they were loose and touching ground.
Once reconnected, it solved the problem for about 6-7 months. I hardly drove the car during that time period only a few times and short duration. But now the cold start problem is back, I'm almost convinced it's the clearance of the sensors this time.
BTW, the clearance should be 0.8mm according to:
http://www.clarks-garage.com/shop-manual/ign-02.htm