|
Matt -- I didn't take off the Targa bar myself, but I'm putting it on myself so will "reverse engineer" the procedure. BTW this car had some pretty ugly 'swiss cheese' rust damage along the tops of the quarters, where the rear window trim and targa bar cover it up. Nasty...there are drains there that commonly clog up and the moisture gets trapped under the trim stuff and rots away the sheet metal. If you are painting a Targa (or a coupe for that matter) I strongly recommend pulling the glass and all the trim, and deal with whatever's underneath, otherwise you are asking for future problems w/ bubbles and paint cracking if not worse.
Anyways, I believe there are 4 bolts that go down through the rear quarters w/ nuts that have to be accessed via the wheel wells, plus some screws that go in across the top/front behind where that $180 targa rear seal goes.
Chris C.
[This message has been edited by campbellcj (edited 07-21-2000).]
|