|
I use a craftsman plug socket, and a 3 inch extention that I tape to it. Make shure the tape is close to the drive hole, don't get it to thick or it will bind up on the head. I use a 3/8 drive flex rachet and break the plug free and the insert a 1/2 to 3/8 adaptor into the extention and turn it out by hand. Take your time on this it's not easy the first time. One other thing, spray so WD-40 on the plug socket when you put the plugs back in. This will let the socket come out alot easier and not get stuck to the spark plug.
Start the plus in by hand, then use the rachet!!!
Good luck
__________________
T Tanner
76, 911s w/ Webers
76, 914/4
57, Speedster
|