|
Yarin,
The colletctor in your picture is probably a 2.5" pipe...
You should be able to cut the pipe at the weld and slip on the SupperTrapp.
Then get a mufflet hanger from the local auto parts store...they make them with a "U" clamp and hangers flat metal piece with holes drilled in it..
Take this and place around the collector and bend the metal bar up and bolt it to the transmission mount as seen in your picture...the 13mm one not the main one...this will support everything on the end of the
This will work fine andtheSupperTrapp should just stick out beyond the bumper...
Test fit everything before you cut and you will not have any problems.
Just watch the very steep driveways is all...normally it will have plenty of clearance.
It will work great and have fun at the track..
John
__________________
John
|