[rjay]

Heres an update on what we're doing. Obviously had we known that we'd end up here, we'd have taken the tubes straight to the frame rail to begin with. Given that couldn't be done, we've reenforced the frame with plate and boxed in the tube. You can see the marks for where the chrome moly plates will go for the shock mounts. We'll try to wind up putting in a V from each box to the center cross tube. Hopefully you'l see the shock mounts in place in the next day or two. Everything is tacked for a quick engine re-install and mockup before everything is finalized. Have to bow low to Conway Autoworks for their incredible tenacity and skill.