|
In previous posts I learned a really good idea from one of the members here. This is by using a cherry picker or engine hoist. The way you do it is lower the engine and tranny down with your floor jack or tranny jack. Then run the chains from the cherry picker to your engine mounts. Use the bolts from the mounts and bolt them to the chains. Then you lift away. I got a hoist from sam's club for around $200, this is really the best way to go. Make sure you leave the big washers on thelower part of the bolt when you do this. I pulled the rubber center right out. Hope this helps, it is really easy compared to other ways. Ed
|