[karlp]

Hmmmmm....
Seems I may have an advance port but no retard port on my throttle body?
The throttle body port I have connected to the advance side of the distributor diaphragm is on the same side as the throttle cable connection.
I'm using an 1/8" hole through a brass plug for the fixed orifice PCV setup. The plug is in a rubber tube that run from the intake plenum to the top of the oil filler baffle.
I brazed 5/16" hose barbs into both valve covers and run hoses from them to a tee to the aircleaner, hooked up between the air filter and the throttle body.
Isn't ~32 degrees BFTD right at that web in the fan, to the left of the TDC timing marks when viewed from the rear of the car?

Karl