|
I do not see a liability issue with respect to the parts. It has to be a concern about the installation, which is understandable. It has to be a safety improvement to go from 20 plus year old plastic to metal! Start by locating your fuel pump up front per recommended upgrade and available kits. Then diagram the connections to the rear and exit the firewall with an "elbow" fitting. Then I recommend the cloth stock gas line, to the filter, and so forth. Take this to a good brake shop and let them lay it out on the counter for you. I did it and am perfectly happy. Incidently, as a result of several "Pinto" fires Ford started putting inertia switches in the rear of the car. I'm putting one in line with the fuel pump near the tank up front. As a security device I can park, whack the magic box and disable the engine. That and the Club should do well.
|