Quote:
Originally posted by gost
Kato, I just installed my pre-mufffler and muffler bypass from Fabspeed and installed a universal O2 sensor manuf by Denso and Craig is right as far as checking it. Also if it runs great through the range of operation then it should be functioning properly as well. My system seems to be perfect so far. What system did you put in and are you using a muffler? Whose O2 sensor did you install?
Gost
|
It's a stock setup except I switched out the cat. with a Dansk (non-stainless) pre-muffler. I used a 'Walker' OEM O2 sensor.
As far as I can tell things are running normally through the range of operation. No issues like the ones described by another member (this is my second premuffler thread):
http://forums.pelicanparts.com/showthread.php?threadid=229811&goto=newpost
The chip is next.
One question for you regarding the re-tightening of bolts after install. (Danskman must be away from his computer because I've tried PMing him regarding this)
Should I re-tighten the bolts after my first long drive and then after about 200 miles? Or is just one of these necessary. Those bolts are in their really tight.
Cheers,
Kato