|
Its a definate fit, you will need to use the 2.2's engine tin, nothing from the 912 tin wise will can/be used. The existing 912 motor mounts will have to be cut out and 911 engine mounts welded in, you will need to cut out the openings for the oil tank in the rr inner well, you will need a correct fuel pump plus add a fuel return line back to the tank. You will need to upgrade rear shocks and install rear stabilizer bar the 2.2 is about 250 lbs heavier. Try doing a search either here or on the 911 board it has been done a few times before.
|