[degreeoff1]

I have everything you will need to build and engine all almost new. (complete balanced crank-pistons-rods, 12# flywheel,and PP) almost new clutch disc, MSD dizzy, 44mm webers (complete) 96mm P&C's with NEW rings Kerry Hunter header(ceramic coated) with suppertrapp, Scat c-35 cam with matching lifters, High rev valve springs and fly cut heads. a 2056 cc engine.

The BAD just rebuilt the engine due to a blown out (helicoiled) spark plug had the heads welded up .....fired it up and walhaaa a rod knock.......The case was bored over (GA CASE) .020. The heads were flycut to an unknown CC but are both the same. I have a spare set of heads (ALL 2.0 LITER HEADS) with 1 small crack in 1 port only and another unmolested GA case I'd let it all go for $2250 + shipping.

I have much more in this engine than that!!

I am going to 6er land and already have the goods for it a 2.4 with S+ cams and 2.2 S P&C's SCREAMER....hence why I am not going to need it any longer...Just built the engine a week ago can still hear it run (does'nt sound too bad yet)

Thanks
Josh