|
There is lots of good advice here.One warning however. When reinstalling the hub,take care not to rock it in the bearing bore. If you do the bearing will come apart.
I made a tool using a long threaded rod 3/4 in.dia., 4 nuts for locking & squeezing the thing together and large warshers. If the bearing tips and comes apart DO NOT force it back together. This will destroy the race. Instead, remove the ball bearings & seal,put the bearings over the race and it will reinstall.Replace seal and be more careful next time. As you can probably tell, Ive prettly well screwed up this operation a couple of times
|