View Single Post
Dan Owens Dan Owens is offline
Registered
 
Join Date: Apr 2002
Location: Manassas Va
Posts: 768
The recline knob center should pop out to reveal three screws if memory serves me. If you look closely you should see a small notch in the edge of the center portion that you can slide a small flat blade screw into to pop it out. Go slow as you can mar the plastic if you pry too hard. It should just pop right out with only a little pressure. Then the knob turns and pops off the back plate. The cable has a retaining nub on the end and if you look closely you can pull the cable down and slide it out of the clip on the underside of the connector lever. The large flat screw on the other side of the seat just unscrews. It might be in there pretty tight and also may have some loctite on it. Watch for the little spacer/washer that are between the pivot points of the seat so that you don't lose them. All this is from memory so it might be slightly different but I''m pretty sure this should do it for you.
__________________
Dan O
84' 3.2 Targa
Old 08-05-2005, 01:26 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)