Quote:
Originally posted by Scott R
The gate never really shuts all the way on my AAV, it leave about 15% open at the end, this was after I had it out and hooked to a battery.
I'm looking at just about everything to help cure an inconsistent idle problem that I have. I have had three CO adjustments now, most recently because I did a valve job, and I still can't get the sucker to idle correctly.
First start the idle is low, and then it gets better. Then after driving for a while it sits around 1500RPM and never drops down. I had my wrench check the hot and cold pressures and they were supposedly correct.
|
I have the same changing idle problem.
If your mixture was set with a valve that never closes fully, then it might be a little rich when you start up. See if it changes to normal when it warms up.