View Single Post
Roland Kunz Roland Kunz is offline
Senior Member
 
Join Date: Nov 2000
Location: Stuttgart FRG
Posts: 2,307
Post

Hello

Pedal - Basehinge rustet and only the rubber holds it togehter.

How can I test the pressure in the fuel lines ? - Normaly with a pressure meter on the little port or hooked into the feedline runing between the two injectorrails.
For a quick check you can feel the pressure by twisting and pressing the fuelline while you short the fuelpumprelay. Also if you turn the key the fuelpump must allways run for a secound and if you do this several times the noise gos from huming into a more angry huming showing the pump has more load/backpressure.

the brake calipers & other issues -

are covered here very often so the archives will give plenty information plus check the Tech pages for pictured back up.

Avoid Sandblasting on the sheets as they will turn into waving metal.

Grüsse
Old 09-07-2001, 03:19 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)