[greglepore]

Just finished mine-good project for a day when we're having 5 in. of rain.

First, thanks for the part, Thom. The only comment I'd make is that perhaps you could "fill" the mold a bit where the distrib cap is close, as its where the hold down bolt is and mine makes significant contact, enough that it was a pain to put the cap on.

I used 2.5 ft of scat to make the transition.

As to the footwell blowers, I fed 12+ into the switch on the lever, and then back out to the black wire. Mine needed the 12+ spliced to into the both sides of the black, in other words, I didn't just cut the wire and run the 12+ to the rotary switch side. Tried it that way initially and it didn't work.

We're going on a leaf run next weekend in the mountains, so I should have a good idea as to how much heat it throws.