[juanbenae]

sup, you gotta add or subtract the angle of the car as it sit on the stands. i forget which it is, but if it says 31* that is 31 from level. i am pretty sure you subtract.

figure out the angle of the car, i used the doorsil, say it sits at 6* while on jackstands, you will subtract the 6 from the 31 and you should set it at 25* from level. i think there is a good section on that in the bently. i used a smart level (not a smart racing tool, but a 2 ft level with degress and %) not the dial and bubble recommended in waynes 101 and bently.