|
OK for a stock set-up per “HP Weber Carb book” use, as a baseline with 44’s, Main Venturi 36, Aux Venturi 4.5, and Main Jet 135, Em. Tube F11, Air Corr. Jet 175, and idle jet 50. This is the jumping off point start, use this as a baseline,
You can run the stock cam. But before you decide on what cam you need, figure out your intended use for the car. Webcam has various cams, Mark Stevens will recommend a lower cam than you can run so that they are on the “safe side of a recommendation”: I.e. doesn’t want to tweak it” solution.
I run an ox sensor to verify that my mix is correct. (Its easier that pulling plugs etc.) Webcam has a bunch of cams but if you the pick the wrong application for your use you will not be happy.
|