|
At the time of my engine drop the jack would lift to within 6" or so of the tailgate of my pickup. I slid the engine in, the stand was about 6" above this so I raised the engine a foot in 6" increments. Mounted the yoke first then slid it into the stand. i did this alone. This was engine only of course.
I did remove the tranny for reinstall. I used an ATV jack on the engine end. On the tranny end I used the base from a small shop rolling stool. Small round platform, four caster type wheels that worked great.
__________________
Kevin
'79 Coupe
|