[Biggy72]

So I'm putting my engine and tranny back in after two years of being apart and am finishing up the last little bit of wiring. I bought a better used fi wiring harness, and am putting it in right now. I'm kind of stuck though.

I've got a 72 with the 1.7, and it's still got the stock fi on it.

On the fi wiring harness (the white harness) I've got three sets of two white wires and I'm not sure where they go, and they all come out at the same spot on the passenger side of the air filter.

Then on the drivers side I've got a two prong plug next to the throttle body that I'm not sure where it goes. It comes out with the plug for the throttle body.

Also I've got a brown wire that comes out next to the oil pressure sending wire from the black harness that I'm not sure where it goes.

And lastly, where does the auxilary air valve plug into?
Once it's all plugged in I get to figure out what I missed and is still messed up, then it might start.
thanks in advance