Howdy, my race partner had this intake manifold built many years ago. It remains unused.
It was intended for a turbocharged 951 using a 16 valve head from an "S" model.
The plenum is 19" long from front to back and 5" in dia. You will have to mod the rear of the plenum to fit it into a street car due to interference with the brake booster etc. The intake runners measure 2" diameter on the outside or about 1 7/8" inside dia.
It has 8 new injectors, four Bosch 036 and four MSD high flow (don't know any other details on the MSDs). Comes with fuel rails as seen in the pictures. I don't have a throttle body for it, but you can drill and tap the inlet flange to accept a throttle body of your choice.
Shipping will be about $30 by UPS ground to most US locations.
Offers?
Jim
