|
Registered
Join Date: Aug 2003
Location: Castro Valley 94546
Posts: 6,469
|
hi Edward;
Porsche standard bolt pattern from 1964 to 1989 was 5 X 130MM. if your wheel is from this period, it will fit the hub of your car. if you're running 16 or 17" wheels on the car this spare should work. if you're running 15" wheels on the car there will be a mismatch in rolling diameter. this may not so bad on the front, but not recomended for the rear. the larger profile may also cause clearance problems on any corner. ride height will also come into play. just my understanding. this is a good question for the guys on the tech board.
HTH
best
jerry
__________________
Unclear on the concept ? Let's see if I can help.
1) You are NOT in the "fast lane" and...
2) You are NOT going "fast enough".
**News Flash**
You're in the Passing Lane. Any questions ?
|