Ok, I have a much better count of what is available now looks to be more 2.7 RS stuff than the RSR.
There are 3 sets of 2.7 high dome RS pistons and cylinder sets
one set of 2.9 JE pistons
5 2.8L Mahle 2.8L pistons and cylinders
6 Mahle 2.9 RSR pistons and cylinders, but we are one cylider short (these are the racing ones without the groove).
3 extra 2.7 RS pistons and cylinders
There is also a partial set of 4 of what looks to be 3.0 RSR style pistons and cylinders (pistons are aftermarket) and should fit a 3 liter case.
Sorry about the confusion with the 2.8L...after careful measuring we found them to be more 2.7RS high dome ones.
The missing pistons and cylinders might be in other boxes in storage, we'll know in 2 or 3 weeks. We are also looking around to find wayward ones to complete these sets.
Not sure what the 2.9 RSR ones are worth... These appear to be factory..just slightly oversized. They are in very good condition. Anyone have any pricing ideas?
I'll try to get emails to all interested parties tonight. I'm posting this in case I don't get to everybody. I'm swamped with trying to open a new restaurant. Thanks for looking!
2.7RS. all three are good usable sets (missing one is the one I took a picture of earlier):
These ar the partial sets. Top row is 2.7RS, next is 2.8RSR, then 2.9 JE sitting in the 2.9 cylinders for the Mahles. Below thare are some partial yet to be identified...
Ok, these are the Mahle 2.9 pistons. They measured 92.6mm...Possibly a cheater set from the factory? Anyone out there have better info???
And finally the partial 3.0RSR ones...
