|
Registered
Join Date: Oct 2001
Location: north vancouver, bc, canada
Posts: 1,737
|
Quote:
Originally posted by jpnovak
Jasper,
I will check for the vent hole mod. Can you describe how big your fuel dam is and how far from the bottom of the float bowl its mounted.
Thanks
|
The dams sit naturally on the shoulder formed by the fuel channels cast into the bottom of the float bowl. If you didn't grind away the fuel pick up, then the dam would sit right in top of that. I estimate 1 cm, but it's been a few years since I did the job.
I cut the dam out of 10 thou brass shim stock, trimmed it as tight as possible to follow the contours of the float bowl, and then JB welded them in. I wsh I had pictyures, but I didn't have a digital camera back then. I promist I''ll photograph them next time the carbs are apart. 
__________________
jasper
2002 996 - arctic silver - PSS9, H&R sways,X51 oil pan, console delete, AASCO liteweight flywheel, gbox detent, RS motor mounts, 997 shifter. Great car.
past: another 2002 996 and a 1978 SC with-webers-cams-etc.
|