Hi all,
I've got a 1972 911T that has virtually no options from the factory, (even has a four speed
), and, as such, has no sway bars.
I'm doing a suspension refresh this spring, and am slowly gathering parts. Mind you, this is a bit of a budget job, so I'll be installing new bushings front and rear, Bilsteins, adjustable spring plates, 25mm rear bars, lowering it to Euro height or slightly lower, bump steer kit, tie rods, and (hopefully) front and rear sways.
I'm not too concerned about installing the front bar, but the rears have me a bit perplexed. See, my trailing arms have no ball mounts for the bars, and I'm wondering if anyone here has ever installed the ball mounts to stock "T" arms. Or, should I just replace the trailing arms themselves?
I don't have the bars yet, just doing a little planning. I'll probably go with stock bars, either 15 or 18mm, depending on what I can find. The car will be mostly street, with maybe a DE or two down the road. It's running a slightly hotter than stock hi-compression E spec 2.4L motor, if that matters.
Thanks,
Jim