|
Today I was at a service to change my timing belt and balance shaft belt.So here it is what i found wrong inside:
1. The intake bot has some holes in it so large that you can see inside.
2. The balance shaft belt was not there.It was MISSING.
3.The balshaft tensioner and the balshaft smooth roller missing.
4.The bypass air valve was not OK.
5. when engine at TDC the camshaft mark was 180 degrees deviated.
I have patched the intake boot and I did not experienced that problem that i had at the full throttle.(I'm not sure it is solved because I was in town and I did not pass 180km/h.)Any way i have seen that the boot is stronger with the throttle at 50-70% then 100% pushed.
Tomorrow I Will start loOKing for the parts missing. I hope I can found them here in Romania.
|