[kach22i]

The good and bad of this roof tape.

I bonded a sample to a rubber raft like material and put it in the freezer. It was stiffer frozen not "hard", warms up from fair to good flexiblity in about 30 seconds.

I put the same sample in my oven for 15 minutes set at 175 degrees. No serious off-gassing (very little smell), however using pliers to pull the sample apart was not a problem - like hot gum on a sidewalk. It lost most of its strength. I put the two pieces back together and in about a minute it had gotten back most of its strength and was very difficult to pull back apart - still warm.