[1fastredsc]

It's a custom job from a friend machinist in mexico. I actually used a picture from the thread about mb911 making an SC box and showed it to him. He said give me your old box and i'll replicate it in aluminum similar to this. So i did, and this is what he gave me back. I think those are a bunch of screws yes, the bottom plate was bent into the curve shaped profile you see, then the rest was screwed together and sealed using some loctite product (518 i think). Just before he gave it to me, he pressure tested it as well to check for leaks. The aluminum he used is really thick, for alumium this thing is heavy. Anyhow, i thought i'd share.