[plymouthcolt]

I reinstalled my clutch slave cylinder (CSC) and apparently did not line up the rod with the divot on the clutch fork--so my pedal is basically flopping back and forth.

I went under again and lined up the rod by feel using that opening on the tranny. I'm 99% sure it's in there as I had to use A LOT of pressure to get the CSC to mate against the tranny and expose the bolts so I could put the screws on.

I just checked the clutch and again I have 3" to 4" of slop. Should the rod on the CSV flopp around loosely? Mine does.

What am I missing?

I can't afford it but I am almost to the point of calling a tow truck and taking it to the pcar shop.